The Jackson safety caps we carry meet Type I impact and Class E electrical requirements. Type I classification specifies that the helmet is intended to reduce the force of impact resulting from a blow only to the top of the head. Class E helmets are intended to reduce the danger of exposure to high voltage conductors. Jackson test samples are proof-tested at 20,000 volts.

It's a good idea to replace your hard hat when it shows any signs of wear such as cracking, hazing, gouging, brittleness, or other questionable conditions. The life of a cap will vary depending upon how often and in what environment it is used (for example, UV light exposure will affect the shell's durability). Inspect your hard hat each time it is used and replace it immediately after any impact or when signs of wear appear, as this might compromise its effectiveness.

Properties:

• Low profile, silhouette styled cap
• Low riding nape strap prevents cap from slipping
• Lightweight, molded from High Density Polyethylene (HDPE) - weighs only 12.5 oz
• Accessory slots can be used to attatch additional protection options
• Available in 6 pt. ratchet and 6 pt. pinlock suspensions for two additional points of impact absorbency
• Compatible with the 137 Capshield, Model C, Model P, A-5500X, 337 Capshield and 437 Capshield
• Meets ANSI Z89.1, Class E Standards

Suspensions:
All safety caps are suspended from just one point - the top of the head. The shock-absorbing construction of the suspension is what reduces high impact forces to lower levels. So the number of points of suspension is not important. The shock-absorbing construction is.

Note that the following colors are available with a minimum order of 10 hard hats: blue, lime, red, white
Note that a 6-point pinlock suspension is available as well with a minimum order of 10 hard hats.

To order one of these other colors/suspensions, please order 10 or more (choose any color/suspension here) and specify the requested color/suspension in the order notes as you check-out.